I’m in the process of adding details on my planes here. I’ll start with the FPV planes first, which should be added within the next few days. Over time I’ll try to keep up with my ever changing collection. 
Click the picture or the “View Page” button below to view specs/details on the planes!
FPV Hangar
FPV Slow Stick
Here’s a quick look at the newest plane in my FPV fleet. It’s a basic GWS Slow Stick with a few mods besides the FPV gear. Those consist of slightly heavier landing gear wire than stock, Dubro wheels, and ailerons. It also has a lite ply battery tray from Radical R/C. Equipment used: Tower Pro …
Easy Star (retired)
This is my trusty of battle scarred Easy Star. It’s been around for some time now, and refuses to give up! It’s not pretty but it gets the job done, and it’s fun to fly which is what really counts! I did run landing gear on this one for a short time, but found that …
Peace Drone v2
Here’s the Peace Drone, or as I affectionately call it, the Death Drone. haha It’s one of Ed’s designs build using Dollar Tree foamboard, hot glue, and packing tape. Check out Experimental Airlines on YouTube for details on his building techniques as well as details on this particular design. It’s a canard pusher that uses …
Maxi Swift
This is one of my favorites! The Maxi Swift! This is the plane I fly when I just want to fly. It will got fast, slow, far, high, low, whatever you want… lol I tend to test different cameras on here, as well as video transmitters, so it’s configuration does change from time to time, …
Skywalker 1900
This is my 1900mm Skywalker. At the time I’m writing this, I’ve only got two flights with it, but I’m liking it a lot already! lol It’s a pretty typical Skywalker build, with good proven equipment that many others have used well in the past. Skywalker 1900mm kit from BEVRC “Special” Skywalker motor and ESC …
Popwing
This one is one of my favorites! It’s Tech One 35″ Popwing, with a power upgrade and some FPV gear. It won’t set any records for long range with the relatively small battery, but it’s got plenty of duration to have some fun! It’s the one to fly when you just want to grab a …
SM450 V2 Quadcopter
This is my FPV quadcopter. It’s a DJI clone from RCTimer, their SM450 V2 kit. I’ve got a Copter Control board on it, and with a little help from Kevin V., I was able to get it flying fairly smooth. Loads of fun! RCTimer SM450 V2 kit RCTimer 2830-1000KV motors with 10×4.5 Gemfan props RCTimer …
Latest Comments